Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Anthony Etzel
/ Categories: Tales from the Road

5 Steps to Getting Everyone On Board With Change

In almost every project, in every industry, I found that the management team or the project team felt that change was necessary. However, talk is cheap when the rubber meets the road. Getting people to embrace change is very challenging.

In an attempt to help realize why change is sometimes necessary for a business to survive and thrive, here is my view on change, presented for your consideration:

C: ChaosLoss of control, no clear definition of what is about to happen. How will things change? For what reason(s) do they need to change? Yes, for a period of time, you may feel like the ground beneath you isn’t solid.

H: Hostility- Will you have more work? Will you lose your job? You will be stressed, which may lead to anger?

A: AloneWhy is this happening to you? Why do you feel like you are the only one who isn’t embracing the change?

N: Nightmare - Most people are afraid of the unknown, and dread uncertainty. They go to great lengths to stay where they are to avoid going down a new path. A new path is scary.

G: GriefOpening the door to bad possibilities - the change could lead to worse outcomes. This leads to feelings of negativity and sadness.

E: Evil – As in, “The End”. You believe that the change could result in complete failure. You think it is a very bad idea that reeks of impending doom.
 

Let’s face it. We all hate change and we put it off as long as possible. I remember one time when I knew I needed to replace my personal computer. I was hoping to put it off as long as possible because I knew how much work would be involved. Well, putting off the change presented a brand new set of challenges when one day, my PC died. Now, I was FORCED into change and it was more difficult than if I planned out the move to the new PC.

I realized that my world was temporarily in CHAOS. I had information on my PC that I needed….email to retrieve, bills that needed to be paid, etc. I felt immediate HOSTILITY that I had to drop everything. I was going to take care of this problem and would be forced to get used to a new machine with a new operating system, new software, etc. I felt ALONE. Why me? Why now? I was living in a freaking NIGHTMARE… so many things to do. Was I forgetting something? What if I can’t get back all of my data? What happens then?!  GRIEF became my friend. I was certain that this was just going to make my life a living hell for months to come. I convinced myself that technology was just EVIL and nothing in my life was ever going to go right again.

A bit overdramatic? Yes. But when change comes, it brings up all of these emotions. How can you avoid drama?

Things to consider when planning change:

1.  Clearly define what you are doing today, and what your world will look like after the change.

2.  Make sure you have a good approach on how to achieve the end goal or specific end result. With a plan in place, your people will be more open to new possibilities and will feel more confident moving forward because there are steps to guide them along the way.

3.  A critical component for successful change is education. Perhaps after education, the fear factor will go away. As they say, knowledge is power! Never assume everyone on the team, or stakeholders beyond the team, understand what the change is and what the benefits are. Every project should begin with educating core team members on why, how, and what we are changing, project goals, and our underlying methodologies.

4.  I always say that without buy-in from management, the project will not be successful. It’s critical to get key decision-makers and influencers lined up and supporting the project early. They can help disarm dissenters long enough to get the change process underway and achieve critical early momentum.

5.  Always share examples of previous success, or small successes along your current path because some people will distance themselves from failure. Champion the successes and contributions of every participant on the team and let them help support the change-makers across the organization.


I want to leave you with this one thought:

"THE SUCCESS OF ANY PROJECT DEPENDS ON THE TEAM ASSEMBLED TO WORK ON IT.”  

They all need to embrace change. Your job is to make it easy for them to do so.

About the author:

Anthony is a recognized industry expert in manufacturing processes and operational improvements. His thirty-plus years of experience encompass a broad spectrum of industry sectors: Automotive, Pharmaceutical, Medical Equipment Manufacturing, Aerospace Manufacturing, Food and Beverage, and General Manufacturing. He is uniquely qualified to quickly and accurately identify the potential improvements in efficiency in both discrete and process manufacturing operations, and identify those specific areas that could most benefit from process improvement.

Previous Article BPCS/LX Tip of the Week: Accurate Job Costing
Next Article Baan/LN Tip of the Week: Month End Miscellaneous To-Do’s
Print
28780 Rate this article:
4.0
Anthony Etzel

Anthony EtzelAnthony Etzel

Other posts by Anthony Etzel

Theme picker

Contact author

Please solve captcha
x

Tips:  LX | BPCS | M3

Understanding: How many hours remain in total and at each operation?

First let’s look at some key BPCS Master File data starting with the routing file.

How many routing steps (operations) are set up that reflect how the product is produced in the factory? If you take a short cut and set up only one operation for the entire process, then you will limit the information seen on the SO inquiry program. Set up the operation steps to reflect what you want to report back to from the factory floor.

Will each of the routing steps run in one work center, or in different work centers? To keep it simple you may want to set up work centers as departments. For example:

  • Assembly
  • Machine
  • Paint
  • Etc.

For each operation setup consider how you have set up the following:

  • Load Codes – for example a code 5 is used if reporting both setup time and run labor time. These codes are maintained in the work center file
  • Basis Code – typical codes are P for pieces per hour,  3 is used for hours per 1,000 pieces
  • Setup hours – if you set them up, you also want to report them
  • Run hours – Direct Labor
  • Machine hours

How you set up th

Came across an article online from Lauber CFO’s, and thought I would share. Here is a checklist for things to consider in order to finish out the year and help you plan for 2016:

 

  • Are your accounting records up to date so that you can make a projection of how the current year will turn out?
  • Are all account reconciliations currently up to date to facilitate the closing of the books after year end?
  • Are there accounts receivable that should be reserved for or written off prior to the end of the year?
  • If your business carries inventory, do you need to plan a physical count as of the end of the year?
  • Has depreciation on your fixed assets been recorded during the year? Have you considered depreciation on current year additions?
  • Have all new asset purchases and bank loans been recorded on your books?
  • Are there any liabilities, for example, pending legal actions or warranty issues, which will need to be recorded prior to year end? 
  • Do you have a plan in place to properly “cut-off” revenue at year end to properly match revenue and expense?
  • Will there be bonuses, profit sharing contributions or discretionary retirement plan contributions paid prior to the end of the year? How will these payments affect cash f
First123124125126128130131132Last

Theme picker

Tips: LN | Baan

All actions required for converting, validating, matching, and posting electronically received bank statements can be performed within a single session:

  • Bank Statement Workbench (tfcmg5610m100)
  • Bank Statement (tfcmg5610m000)

Alternatively, you can use the sequence of electronic bank statement sessions outlined below.

Steps to Process Electronic Bank Statements:

1345678910Last

Theme picker

Categories