Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Baan/LN Tip of the Week: GRINYA Reconciliation – What Could Go Wrong?

Kathy Barthelt 0 47296 Article rating: No rating

One common GRINYA issue would be incorrectly entered Integration Setups.

Check the Baan or Infor LN manual for recommended Integration setups. If such a mistake were to occur, it is important to know for what period of time the Integration was in error.

To ensure, it’s recommended that the Integrations Setup tables should be audited either through Baan/LN or Database Auditing. Corrections can be quickly calculated when an exact timeframe can be determined.

BPCS/LX Tip of the Week: Inventory Control

Anthony Etzel 0 34130 Article rating: 1.0

Is Lot Control necessary?

Certain industries require lot control, where others may find it an option based on how they want to trace the material used in a product in the event of a defect, or recall.

LX provides tight lot controls and flexibility with lot number assignments. Shop orders can have a pre-assigned lot number, or a lot number can be automatically assigned when the item is produced. You can also assign a specific lot number for the entire shop order, or for each item/quantity reported against a shop order.

BPCS/LX Tip of the Week: Alternate Items

Anthony Etzel 0 37125 Article rating: No rating
How can I use an alternate item on a shop order?

The best way is to have the approved alternate item appear on the Bill of Material just after the standard item with a zero required quantity. Now the alternate item will appear on the Shop Order. So, if the standard item is not available, the alternate item can be issued to the shop order.

When the shop order is closed out, one item will have an unfavorable variance while the other shows a favorable variance. This is an easy way to provide alternate items provided engineering approves and they are part of the Bill of Material.

Baan/LN Tip of the Week: Negative Inventory

Kathy Barthelt 0 45444 Article rating: No rating

If Location Control is turned on in Baan IV, then inventory should never be negative.

If Location Control is not turned on in Baan IV, and the parameter “Negative Inventory Allowed” in INV Parameters is set to “NO”, then inventory should never be negative.

In Baan V and LN, the parameters in Inventory Handling Parameters determine whether you can have negative inventory. If these parameters are set to “NO”, then inventory should never be negative.

RSS
First133134135136138140141142Last

Theme picker

Tips:  LX | BPCS | M3

TECHNOLOGY: Facility Security Ranges

Previously, a user could complete the Cost Transfer (CST920) process for any range of facilities regardless of their security settings established in SYS600. This enhancement verifies the user security settings set up in SYS600 before processing cost transfers for a range of facilities in CST920. If the user has authority for a facility range, but there are facilities within that range that are not authorized, the program skips those facilities and completes the cost transfer process.

FINANCE: Expiration Date for Quotes and RMAs

A Cancel-by-Date has been added to the Quote Header and RMA Header panels. This optional field can limit how long a quote or authorization to return items for credit is valid.  

For quotes, this enhancement provides an optional end date for the quote. For RMAs, it provides an optional date by which the customer must return the items to receive the credit listed on the RMA.

The Cancel-By-Date prints on the Order Acknowledgement and RMA Acknowledgement to inform the customer of this important limitation to the quote or return authorization. 

An Order Entry user cannot copy the quote to create a new order if the Cancel By Date has caused the quote to expire.

OPERATIONS: Default Split Salesperson to Customer Orders

Sales commissions are based on combinations of the Primary, Split, and Line-Level salesperson and the commission codes defined for the customer and item. You can now define the Split Salesperson in the same master files as the Primary Salesperson. While the Primary Salesperson is mandatory, the Split Salesperson is optional. It defaults during Order Create using the identical hierarchy as Primary Salesperson. Using Split Salesperson provides more flexibility in the calculation of sales commissions. The ability to define a default Split Salesperson improves the accuracy of sales commission qualification and calculation and reduces maintenance and adjustments necessitated by corrections.

Previously, a user could complete the Cost Transfer (CST920) process for any range of facilities regardless of their security settings established in SYS600. This enhancement verifies the user security settings set up in SYS600 before processing cost transfers for a range of facilities in CST920. If the user has authority for a facility range, but there are facilities within that range that are not authorized, the program skips those facilities and completes the cost transfer process.

12345678910Last

Theme picker

Tips: LN | Baan

Crossroads RMC

Dashboards vs. Reports – What do they offer and which do I need?

Companies are collecting oceans of data, and struggle with transforming it into usable information. Most businesses focus on two methods of sharing data - the report and the dashboard. While these two terms mean many things to many people, it is important to understand what these terms mean and how the report and dashboard have similar features but they are not the same thing.  

What is a Report?

A report is meant to be used to gather detailed intelligence on the operations within an organization, thus a report can be either very broadly covering a wide scope of related information, or narrowly focusing on details of a single item, purpose, or event. All of this information, while presented in a report, is meant to be a snapshot in time.

Quite often, a report is built within the ERP system itself and often is constrained by the graphical and user limitations within the ERP. More often than not, large amounts of data are exported to Excel where added features allow for better manipulation of the data to a format that is digestible by users. Regardless, the data is only valid for that moment and time.

What is a Dashboard?

A dashboard is a graphical interface that provides at-a-glance views revolving around answering a central question. For example, an executive may ask you for up-to-the-minute details on "how the business is doing?". The answer to that question is as complex as the organizational structure of the company, but it is probably very simply measured with approximately 10 metrics. Those 10 metrics can likely be analyzed in chart form, and can and should be combined into one chart when the numbers are relatable or are on a similar scale. All these things should be considered when building a dashboard.

Dashboards, similar to the one in your vehicle, display critical data. Imagine driving down the road and having to push a bunch of buttons to find out how much fuel you have left, or having to pull over and pop the hood to check the oil pressure. It would be dangerous and a waste of your precious time. Your car's control panel or dashboard displays the most crucial information in an easy-to-use, graphical way.

How do Dashboards and Reports differ?

First, a report contains much more detailed information. Where a dashboard might provide a CEO with information on how the entire company’s sales are progressing, a corresponding report will give the CFO or VP of Sales the ability to see how each sales region or even salesperson is performing and make leadership decisions. Just like responsibility, data will get more granular as the organizational hierarchy goes down. The C-Suite might be interested in the detailed data, but for seeing a snapshot of high-level information, the dashboard is the desired mode.

Second, a report is much longer than a dashboard. Not only in the amount of detail but also visually. Tables and charts that live within a report can take up many pages. Furthermore, a report will likely require the reader to scroll through many screens or click from page to page.

A dashboard should confine its display to a single screen with no need for scrolling or switching among multiple screens. Something powerful happens when we see things together, all within eye span. Likewise, something critical is compromised when we lose sight of some data by scrolling or switching to another screen to see other data.

When an individual dashboard has so much information on it that scrolling is required, the power of the dashboard is diminished because the information that lives there is intended to be viewed together. Each piece of information on the dashboard is meant to give the reader the ability to answer part of the central question of the dashboard. These charts combine to answer the question, so if the reader can’t see them together, making them work together is much more difficult.

To sum it up, a report is a more detailed collection of tables, charts, and graphs and it is used for a much more detailed, full analysis while a dashboard is used for monitoring what is going on. The behavior of the pieces that make up dashboards and reports are similar, but their makeup itself is different. A dashboard answers a question in a single view and a report provides information. Put in another way, the report can provide a more detailed view of the information that is presented on a dashboard.  

With dashboards, you can empower your entire team with data insights in real-time information, so your data is never stale. Users can create and share custom views of your data on the fly, in minutes.

With powerful Dashboards, you can:

  • Create pie charts, graphs, interactive maps, and more with just a few clicks.
  • Build a dashboard once and make it instantly available on any device.
  • Tell a story with your data with your own custom layouts, colors, and commentary—all with no coding and changes available instantly to users.
  • Know you always have current reports with real-time data updates.
  • Access your dashboards from anywhere–computer, tablet, or phone.
     

Manufacturing

Enlarge Production Summary Dashboard Enlarge Work Center Job Step Status


Finance

Enlarge Accounts Receivable Dashboard


Materials

Enlarge Inventory Dashboard Enlarge Sales History Dashboard


 

Analytics Dashboard for Infor LX & BPCS>

Analytics Dashboard for Infor LN & Baan>

Contact us today to learn how dashboards can help you go fast, go big, and go bold.

Print
23676 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Theme picker

Contact author

x

Categories